Automatic Hydraulic Baler-manufacture,factory,supplier from China

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

Overall technical parameters of Pallet Push-pull Pproduct Line1. Hydraulic pusher:Pallet retention ejector, without side shift, without forks, without pallet retention function, push-out structure is scissor structure2. The load capacity is 1500KG, the loss distance is about 280mm, and the horizontal center of gravity is about 135mm (subject to the actual design)3.

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

1. Main technical parameters of Automatic Lifting PlatformNo.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor

Properties of Full Automatic Unmanned Bag Folding Machine:This machine should be used with the automatic bagging machine:Table height: 600mmApplicable power supply: 220v 4.5KWSupply of air pressure source: 6KG/cm2Main Parameters of Full Automatic Unmanned Bag Folding Machine：Machine Size2700×2190×2100mmBox SizeL690*W520*H248mm  L640*W450*H300mmSource power220V  50/60HZAir pressure source5Kg/cm2 Main configurations of Full Automatic Unmanned Bag Folding Machine：ConfigurationsInstructionBrand/OriginControl systemThe latest special PLC controller for stepping mo

Production Instruction of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor：1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor:1. The central frame is welded with carbon steel (5mm thickness). The external conveyor chain frame is installed from the top by the center frame to the bottom.2.

Peculiarity of Automatic Roof Adding Rectangular Coordinate Manipulator:1. Multi-degree of freedom movement, the spatial angle between each motion freedom is a right angle.2. Automatic control, reprogrammable and all movements run according to the program.3. It is generally composed of control system, drive system, mechanical system, operating tools, etc.4. Flexible and multi-functional, due to the different functions of the operating tools.5. High reliability, high speed and high precision.6.

  Main electrical parts and spare parts of Full Automatic Rotary Arm Stretch WrapperComponent nameBrandPLCSiemensTouch screenSiemensinverterSchneiderPhotoelectric switchPanasonicProximity switchOMRONCircuit breakerSchneiderMini circuit breakerSchneiderContactorSchneiderSolenoid valveStandard configuration: YADEKECylinder Standard configuration: YADEKERocker driving reduction motorChina famous brandMaster device SchneiderBolts and other fasteners Grade 8.8DC24V-3A power supply shall be provided separately, and Mingwei shall be selected as the DC power supply;2、Main tech

Features of automatic scissors lifting platform:1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded by itself without tools.2. The use of maintenance-free lifting arm sleeve, powder coating and nickel-plated bolt pin increases the wear resistance of the shaft pin and prolongs the service life of the lifting platform.3. Low noise can enable the operator to operate in a quiet working environment, and the large-angle steering system provides face-to-face maneuverability.4.

Warehousing logistics refers to the bulk storage of bulk substances and commodities on a pallet foundation in massive warehouses. Among them, automatic warehouse adopts mechanized operation and records scheduling, which is an superior warehousing mode broadly diagnosed by means of the society and is extensively used in agency completed product warehousingThe completed product warehouse of the business enterprise is linked with the manufacturing workshop thru the air transmission line.

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

Automatic product carton positioning. Automatically lift the carton outward and inner bag after packing, and automatically press the carton into the carton by folding it in half in both directions. Realize automatic output for easy box sealing. Realize unmanned assembly line equipment, improve work efficiency, reduce labor, and improve customer production technology and automation. This machine adopts P.L.C+ display control, which greatly facilitates operation, management, reduces production personnel and labor intensity, and is an indispensable equipment for automated large-scale production.

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

OPERATION OF Hot Saels For Full Automatic Turntable Wrapping MachineThe conveying roller will transport the pallet of drink products to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically ，after it ,the pallets will be transported by conveying rollers.The procedure of next will be alike.Main electrical parts and spare parts of Full Automatic Turntable Wrapping MachineComponent nameBrandPLCOMRON(Standard configuration)Touch screenOMRON(Standard configuration)inverterMCGSPhotoelectric switchOMRONProximity switchOMR

Features of Full Automatic Extended Corner Protection Horizontal Strapping Machine1. Steel frame structure to ensure the stable operation of the machine2. The machine head adopts the integrated design of automatic tightening, welding and cutting belt, which is fully suitable for packing belt3. The machine head can be moved close to the goods and then belted, avoiding the change of pallet size and some gaps are too large4. Automatic detection device for pallet material height. The encoder controls the precise strapping position according to different stamp heights5.

Main technical parameters of Jump-on Case Packer Fully Automatic Carton Cargo Packing MachineEquipment production capacity: running speed 4 boxes per minute, jump packing method.Packing and bag arrangement: one pack per box, lying down.Package size: length * width * thickness = 520mm * 370mm * 190mmWeight per pack: 10 kgEquipment power: not more than 1.5KwControl power: 24V DCCompressed air: 0.4-0.6Mpa, 30L/MINMain Features: Operation panel/display: flow chart and maximum fault indication, with perfect mechanical and electrical protection functions;Main transmission parts: 45 steel i

Material Of PP packing strap for automatic strapping machine :Polypropylene wire drawing resin has many advantages, such as good plasticity, strong breaking tension, bending resistance, light specific gravity, high strength, good toughness, soft texture, non-absorbent, recyclable, smooth end surface, small wear and tear, many varieties, easy to use and so on. It has been widely used in various fields.PP packing strap for automatic strapping machine basic description:1. Polypropylene (PP) is the main raw material.

Standard  specifications Of Full Automatic Unmanned Carton Bagging Machine:Mechanical dimensionsL2400 × W1700 × H1850mmCarton Size (L200～600) × （W200-450）(H=H+W/2<550)mmInbound speed22m/min (0-10 boxes/min)Size of adhesive filmW220 ～ 600mm (M-type folding barrel membrane)Film thickness30~80um (M-type folding barrel membrane)Conversion of carton adhesive filmCarton:（L+W）*2+160mmPower Supply220V/380V  50HZTable Height <600mmMechanical length including leveling of bag in boxStandard machine length 1800mmNon standard machine specification：Mec

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

 Specifications Profile Plate Conveyor System Automatic Online Packaging Line :MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations for Profile Plate Conveyor System Automatic Online Packaging Line:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 p