Conveying And Stacking Packaging-manufacture,factory,supplier from China

Workflow Automatic Conveying And Stacking Packaging System For Gypsum Lines Or Long Wire Sheets：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packag

Technical specifications of Paper Roll Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.

Brief Introduction Of Jacking Transplanting SorterJacking Transplanting Sorter Is Widely Used In Automatic Storage And Logistics System. Conduct Shunting And Merging Of Logistics Boxes Or Packing Boxes. Allocation Operation Is A Non Common Operation In A Physical System. This Equipment Can Be Used In Shunting And Distribution Operations. Diversion Refers To That The Conveying Line Is Divided Into Two Lines Along The Conveying Direction Of The Roadway. Generally, The Goods Are Transported In Categories.

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

Classification requirements:1.

Scheme of Intelligent Sorting And Conveying System For Manmade Board Industry:The inspection plate specifications are wide (1080-1830), long (2100-2745), working level: veneer transport 2350mm;The pallet transport height is 800mm, the scheme is at the exit of the butt sand saw line The pallet is reversed through the 360 rotary roller conveyor to enter our roller chain conversion conveyor into the lifting table in turn to raise the working height to 800, so that it enters the double-line double-entry plate destacking position through the roller chain conversion conveyor in turn for plate inspec

1.2、Packaging materials:1. LLDPE stretch film;2.

Technical parameters of Automatic Door And Window Wide Horizontal Wrapping Winding Packaging Machine1. Product specifications and packaging requirementsPackaging: doors and windowsWidth: 1000mm-2400mmThickness: ≤ 120mm, ≥80mmLength: ≥1200mm, ≤2400mm2. Packaging materialsUse a fixed size wrapping filmLLDPE stretch filmThickness: 20-30μmFilm width: 500mm (fixed size)Inner diameter of paper cylinder: 76.2mmMaximum outer diameter of film roll: 240mmSupply Scope:1.

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

PP Packaging Strap/Belt/Tape Details：PP Pacakaging Strap/Tape/Belt Specifications：itemvalueMaterialPPApplicationMachine PackingPlace of OriginChinaZhejiangBrand NameZHONGLIANModel Numberpp-strapColorsGreen Color etcDelivery & Shipping Pictures of PP Packaging Strap:Straping Pictures refrence:More information, please contact with me at any time.AdyWhatsApp:+86 15634865861

Product performance advantages:1. Touch screen control, easy to operate;2. Pre-stretched film frame, 220V AC motor with inverter to adjust the tension force, change the speed regulation of the 24V DC motor and power box applied to the film frame in the same industry in China, and change the instability of tension force.Technical Parameters:1. Turntable diameter: 2000mm (this data is for reference, subject to the design of the technical department)2. Wrapping specifications:3.

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

PE film has moisture resistance, small moisture permeability, is a blown film, thick texture, not easy to stretch and deform.Product Specification For PE capping films(More specification,please contact with us at any time):Width (mm): 300-2000Thickness (mm): 0.05-0.40Production process of PE film:Film blowing machine is a mechanical equipment that heats and melts plastic particles and then blows them into a film.

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

Intelligent Packing System  For Manmade Board Scheme Feature:1. The transfer conveyor requires stable conveying.

Packaging process:The steel coil is conveyed through the power conveyor (customer's own equipment), and before entering the ring machine, the upper machine transmits the steel coil specifications (including the inner diameter, outer diameter, width, weight, etc.) of the steel coil to the ring machine control system.The steel coil enters the ring machine through the power conveyor (customer-owned), and the ring machine automatically switches the packaging program according to the steel coil specifications provided by the upper machine, and the ring machine automatically packs the steel coil

2、Main technical data of turntable arm wrapper: 2.1 technical date：1. Machine bearing: 2000Kg (max)2. Packaging efficiency: 30 load/hour (max) (calculated according to two layers of packaging) (10000 bottles/hour)3. Speed of conveyor line: 140mm/s4. Elevation of conveying surface: 500mm (to be determined)5. Rocker arm speed: 15rpm (max)6. Total power:~3KW7. Operating Weight: 2000Kg2.2、packing material Stretch film：3 inched diameter of core，500mm in width，the diameter of film is 260mm，film thickness:20－35μm 2.3、Site preparationCompressed air source:1.

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Specification of Good Net/Reticulated Film For Packaging Agricultural Silage Stretch FilmWidth500mmLength3000mStyleCustomizedUsePackingImported raw materials(LLDEP)Our corporation makes use of imported linear low density polyethylene (LLDPE) raw material from ExxonMobil Chemical, Chemical, Dow Dow Chemical and different corporations to produce our wrap films. Imported LLDPE raw material have greater first-class requirements and extra stringent manufacturing processes, ensuing in greater reliability and sturdiness of our products.

Goods Specifications:MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 pieces200mmLength914mm~1500mm2 pieces360mmLength1500mm~2400mm2 pieces450mmLength 2400mm~3600mm3 pieces443mm or more630mm

1. Packaging overview1.1 This equipment is a special equipment for automatically winding stretch film onto the carton.