Forklift-manufacture,factory,supplier from China

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

APPLICATION OF AGV Unman ForkliftIndustrial layout - intelligent logisticsBMW Stacker AGVAGV in photovoltaic industryAGV in tyre industry Technical Parameters of AGV Unman Forklift:Parameter ItemParameter indexModelAGVBasic functionCarrying, liftingDeadweight300KGGuidance modeMagnetic navigationTravel directionForward and backwardDrive mode4WDForward speed10m/min~30m/minAddress reading modeRFID componentsLoad capacityCarrying 200KG (maximum load capacity measured under the optimal road surface)Lifting stroke400mmGradeability≤2°Minimum turning radiusR800mmLinear guidanc

Product introduction of AGV Unmanned Forklift:AGV depends on its personal battery to furnish power, using stability, no noise, no air pollution at some stage in driving, and can be used in many locations that require a smooth working environment. Touch display human-computer interplay is adopted to facilitate the placing of parameters and stations.

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

Main technical parameters of Jump-on Case Packer Fully Automatic Carton Cargo Packing MachineEquipment production capacity: running speed 4 boxes per minute, jump packing method.Packing and bag arrangement: one pack per box, lying down.Package size: length * width * thickness = 520mm * 370mm * 190mmWeight per pack: 10 kgEquipment power: not more than 1.5KwControl power: 24V DCCompressed air: 0.4-0.6Mpa, 30L/MINMain Features: Operation panel/display: flow chart and maximum fault indication, with perfect mechanical and electrical protection functions;Main transmission parts: 45 steel i

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Here's how AMRs fluctuate and why they can be a higher desire in sure situations:Autonomy: The most significant difference is autonomy.AMRs don't rely on human operators to information them.They can navigate thru the coffee roasting plant independently,avoiding obstacles and following predefined routes.This eliminates the want for a dedicated operator.More informations or requirements, please contact with us at any time.AdyWhatsApp:+86-15634865861

Packaging process:The steel coil is conveyed through the power conveyor (customer's own equipment), and before entering the ring machine, the upper machine transmits the steel coil specifications (including the inner diameter, outer diameter, width, weight, etc.) of the steel coil to the ring machine control system.The steel coil enters the ring machine through the power conveyor (customer-owned), and the ring machine automatically switches the packaging program according to the steel coil specifications provided by the upper machine, and the ring machine automatically packs the steel coil

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

1. Usually the Stainless Material Roller Conveyor System can be divided into strength and non-power curler traces in accordance to using mode.Power curler conveyor systemStandard energy curler tools can be divided into two types: retractable kind and constant type. Its fundamental shape involves casters, a rack, a roller, an electric powered manage box, and using equipment.Non-power curler conveyor systemSuitable for all bulk materials, small items, or uncommon objects that need to be positioned on pallets or switch boxes.

Workflow Automatic Conveying And Stacking Packaging System For Gypsum Lines Or Long Wire Sheets：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packag

Technical specifications of Paper Roll Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.

Technical parameters:Paper corner protection specifications: 50×50×5mmEach corner guard bank is placed in an amount of not less than 80 corner protectorsWrapped objects:Packing size: 1200×1100×130mm (pallet) (length * width * height)Paper Corner Protection Machine parameters1. Machine load: 2000Kg(max)2. Packaging efficiency: complete a package within 3 minutes (calculated according to the maximum external size, and including the time of paper corner protection)3. Winding conveyor line (self-provided by the demander)5. Rocker speed: 15rpm (max)6. Power: ~3.5KW7. Machine weight: 2000Kg8.

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

Manufacturing method of Good Quality Strapping Machine Using PP Packing Tape:1. This product is made of new polypropylene material.2. Production of exceptional superior gear and Japanese embossing technology.3.

Detailed description of PET plastic metal strip/PET Band Roll Strapping Tape:PET plastic metal belt, additionally recognised as plastic metal belt (PET packaging belt, polyester binding belt), is made of polyethylene terephthalate (PET) as the important uncooked material. At present, PET plastic metal strip is the most famous new environmental safety packaging cloth to substitute metal strip, metal wire and PP belt packaging in the world.

The new generation of hand-held electric packer H-46 Kronos has attracted the attention of global consumers with highly competitive prices, excellent performance and technical features, and has received constant praise since its launch!   Features of Semi-auto Handle Type Strapping MachineNo air pressure source, easy to move and useFriction welding technology is adopted;German made DC brushless motor;Equipped with intelligent digital operation panel;Use high-efficiency Bosch lithium-ion battery;General PP and PET tape;The maximum packing tension can reach 400 kg;One key packagin

Main Parameters Of Airport Using Bag Wrapper Machines1. Machine introductionLuggage wrapper is designed to wrap baggage and relate gadgets for protection reason in airport.Film presents more guide whilst the baggage is being transport to guard from being damaged.The operator locations the baggage on the platform and adjusts vertical rods to impervious bag in accordance the luggage's size.2. Technical parameterMax.

Strapping Machine technical requirements and component formulationRemarks:Packing frame sizePassable height: up to 1400 mmWidth that can be passed: up to 2100 mmDrive method: Driven by a stepless variable speed motorApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgStrapping Machine requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, the strapping strapping slope is ≤ 30mm, and the strapping

SUPPLY SCOPE:Strapping packing unit (incl. with reeling car)The strapping machine adopts TITAN (VK10K120-16 electric ironing type) strapping machine head imported from Germany. Strapping straps are adopted 12.5-15.5mm x 0.6-0.8mm strapping strap for PET machine. The strapping machine works with the foot bar unit to fix the wooden foot bar bar with the top plate.

DESCRIPTION Of Horizontal strapping machine  :Pallet dimensions :1290 x 1290x150 mm.Load dimensions: 1200 x 1200 mm.Pallet height: Min.1049mm including pallet heightPallet weigh: 1200kg/palletConveyor height: 200mm. (chains conveyor)Strapping pattern: horizonltalProduct strapped:  Metal bucketProduction capacity :120Pallet/hour-2pcs stap in one pallet materials SOLUTION For Horizontal strapping machine :It is a strapping laptop at one head appositively deliberate to a entire automation of the packaging lines.

Operation Guiding of Banding Machine(automatic strapping machine):Put the tape into the set position, press the "feed" button to twist the tape will automatically be delivered to the position and enter the working state.Manual mode Place the product to be bundled in the middle of the strapping area, press the "start" button, strap the product to be bundled, glued and cut, and then send it into place to enter the next strapping job.The bundled product is removed and the machine can proceed to the next bundle.Auto Mode Press the "Auto" key, and the light will turn o

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th