Horizontal Full Automatic Strapping Machine-manufacture,factory,supplier from China

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Parameters Of Horizontal Strapping Machine headingStrap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Horizontal Pallet Full Automatic Strapping Machine  Strap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

Features of Full Automatic Extended Corner Protection Horizontal Strapping Machine1. Steel frame structure to ensure the stable operation of the machine2. The machine head adopts the integrated design of automatic tightening, welding and cutting belt, which is fully suitable for packing belt3. The machine head can be moved close to the goods and then belted, avoiding the change of pallet size and some gaps are too large4. Automatic detection device for pallet material height. The encoder controls the precise strapping position according to different stamp heights5.

DESCRIPTION Of Horizontal strapping machine  :Pallet dimensions :1290 x 1290x150 mm.Load dimensions: 1200 x 1200 mm.Pallet height: Min.1049mm including pallet heightPallet weigh: 1200kg/palletConveyor height: 200mm. (chains conveyor)Strapping pattern: horizonltalProduct strapped:  Metal bucketProduction capacity :120Pallet/hour-2pcs stap in one pallet materials SOLUTION For Horizontal strapping machine :It is a strapping laptop at one head appositively deliberate to a entire automation of the packaging lines.

Properties of Full Automatic Unmanned Bag Folding Machine:This machine should be used with the automatic bagging machine:Table height: 600mmApplicable power supply: 220v 4.5KWSupply of air pressure source: 6KG/cm2Main Parameters of Full Automatic Unmanned Bag Folding Machine：Machine Size2700×2190×2100mmBox SizeL690*W520*H248mm  L640*W450*H300mmSource power220V  50/60HZAir pressure source5Kg/cm2 Main configurations of Full Automatic Unmanned Bag Folding Machine：ConfigurationsInstructionBrand/OriginControl systemThe latest special PLC controller for stepping mo

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

The strapping head is on top with an automatic extension of the corner guards with a strapping machine for piercing arrows.The strapping machine consists of the following parts:1. Strong and durable structural frame2. The strapping machine head can provide reliable tensile force and stable interface strength, modular and quick replacement3. Through the structure of braking motor + rack and pinion, drive the pressure plate frame to move up and down4. The machine head is firmly placed in the head seat, and follows the lifting frame to do vertical movement5.

  Main electrical parts and spare parts of Full Automatic Rotary Arm Stretch WrapperComponent nameBrandPLCSiemensTouch screenSiemensinverterSchneiderPhotoelectric switchPanasonicProximity switchOMRONCircuit breakerSchneiderMini circuit breakerSchneiderContactorSchneiderSolenoid valveStandard configuration: YADEKECylinder Standard configuration: YADEKERocker driving reduction motorChina famous brandMaster device SchneiderBolts and other fasteners Grade 8.8DC24V-3A power supply shall be provided separately, and Mingwei shall be selected as the DC power supply;2、Main tech

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Standard  specifications Of Full Automatic Unmanned Carton Bagging Machine:Mechanical dimensionsL2400 × W1700 × H1850mmCarton Size (L200～600) × （W200-450）(H=H+W/2<550)mmInbound speed22m/min (0-10 boxes/min)Size of adhesive filmW220 ～ 600mm (M-type folding barrel membrane)Film thickness30~80um (M-type folding barrel membrane)Conversion of carton adhesive filmCarton:（L+W）*2+160mmPower Supply220V/380V  50HZTable Height <600mmMechanical length including leveling of bag in boxStandard machine length 1800mmNon standard machine specification：Mec

OPERATION OF Hot Saels For Full Automatic Turntable Wrapping MachineThe conveying roller will transport the pallet of drink products to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically ，after it ,the pallets will be transported by conveying rollers.The procedure of next will be alike.Main electrical parts and spare parts of Full Automatic Turntable Wrapping MachineComponent nameBrandPLCOMRON(Standard configuration)Touch screenOMRON(Standard configuration)inverterMCGSPhotoelectric switchOMRONProximity switchOMR

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th

Material Of PP packing strap for automatic strapping machine :Polypropylene wire drawing resin has many advantages, such as good plasticity, strong breaking tension, bending resistance, light specific gravity, high strength, good toughness, soft texture, non-absorbent, recyclable, smooth end surface, small wear and tear, many varieties, easy to use and so on. It has been widely used in various fields.PP packing strap for automatic strapping machine basic description:1. Polypropylene (PP) is the main raw material.

Technical parameters of Automatic Door And Window Wide Horizontal Wrapping Winding Packaging Machine1. Product specifications and packaging requirementsPackaging: doors and windowsWidth: 1000mm-2400mmThickness: ≤ 120mm, ≥80mmLength: ≥1200mm, ≤2400mm2. Packaging materialsUse a fixed size wrapping filmLLDPE stretch filmThickness: 20-30μmFilm width: 500mm (fixed size)Inner diameter of paper cylinder: 76.2mmMaximum outer diameter of film roll: 240mmSupply Scope:1.

Vertical strapping with 2 x 0 straps of pallets Load dimensions including pallet ( L x W x H):1200~2280 mm L x 1200-2000 mm W x  650~2200 mm H (must be checked and confirmed).Main components of vertical strapping machine  1. Basic machine frame with two columns and cross beam, vertical carriage guides and chains2. Rack module, movable between two columns with carriage guide system3. Carriage drive with geared brake motor4. Strap track (chute) frame made of grooved aluminium profiles and fixed to machine frame, spring loaded short flaps to allow strap feed at

Technology Parameter of T1650FZ Full Auto Pallet Wrapper Machine:Turntable sizeD=1800mm, H=78mmWrapping size(500-1200)×（500-1200）mm（L×W）Packaging height2400mmTurntable loading2000kgsMachine weight800kgsMachine power1.5kwTurntable speed0-12RPMPower supply voltageSingle-phase 220VPacking materialLLDPE stretch filmControl system of Wrapper Machine:HMI handy to function separate top, backside & up-down wrap rely selectorsPhoto-eye pallet peak sensorReinforce wrap enable extra wrap on equal pointFilm anxiety adjustment on the HMI panel3-12 rpm variable turntable pace by means of

Technical data of Automatic Vertical Pallet Strapping Machine1. power supply:  3/ n, pe, (neutral wire = loading ability)2. control voltage: 24 v dc3. power score:  max three.zero kw4. overall weight of device: approx. 800 up to 1.000 kg5. ambient temperature restrict:  + five °c up to + 35 °c6. peak of conveyor system:  pinnacle side roller / chain of conveyor machine min. 180mm up to max.

Strapping Machine technical requirements and component formulationRemarks:Packing frame sizePassable height: up to 1400 mmWidth that can be passed: up to 2100 mmDrive method: Driven by a stepless variable speed motorApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgStrapping Machine requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, the strapping strapping slope is ≤ 30mm, and the strapping

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

SUPPLY SCOPE:Strapping packing unit (incl. with reeling car)The strapping machine adopts TITAN (VK10K120-16 electric ironing type) strapping machine head imported from Germany. Strapping straps are adopted 12.5-15.5mm x 0.6-0.8mm strapping strap for PET machine. The strapping machine works with the foot bar unit to fix the wooden foot bar bar with the top plate.

PET Plastic Strap/Belt/Tape , to higher make certain the protection of your goods, professional, environmentally friendly, handy and environment friendly packaging offerings will be provided.Specification of Hot Sales PET Strap For Strapping Machine:itemvalueMaterialPPApplicationMachine PackingPlace of OriginChinaShandongBrand NamezhonglianModel Numberpp-strapColorsGreen Color etcHot Sales PET Plastic Strap for automatic strapping machine - Common StandardsNOTypeWide mmThickness mmFracture strength N（Max）Paper tube specification  mmCoil lengthm1PET 090054*35009±0.30.54+0.031900406×1503500

Technical data of Automatic Vertical Pallet Strapping Machine1. Power supply:  3/ N, PE, (Neutral wire = loading capacity)（2. Control voltage: 24 V DC3. Power rating:  max 3.0 kW4. Total weight of machine: approx. 800 up to 1.000 kg5. Ambient temperature limit:  + 5 °C up to + 35 °C6. Height of conveyor system:  Top edge roller / chain of conveyor system min. 180mm up to max. 800mmTechnical DataKA5Strap quality and widthPET9,0 - 18,5 mmPP/Strap coilCore diameter406 mmOuter Diameter600 mmWidth150 mmNo.

Manufacturing method of Good Quality Strapping Machine Using PP Packing Tape:1. This product is made of new polypropylene material.2. Production of exceptional superior gear and Japanese embossing technology.3.