Hydraulic Baler Machine-manufacture,factory,supplier from China

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

Overall technical parameters of Pallet Push-pull Pproduct Line1. Hydraulic pusher:Pallet retention ejector, without side shift, without forks, without pallet retention function, push-out structure is scissor structure2. The load capacity is 1500KG, the loss distance is about 280mm, and the horizontal center of gravity is about 135mm (subject to the actual design)3.

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

Processing requirements of 90 Degree Roller Turning Machine:Taper roll carbon steel galvanized, frame rectangular pipe sprayed;Technical note of 90 Degree Roller Turning Machine:1. SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;3.

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

Technical parameters:Paper corner protection specifications: 50×50×5mmEach corner guard bank is placed in an amount of not less than 80 corner protectorsWrapped objects:Packing size: 1200×1100×130mm (pallet) (length * width * height)Paper Corner Protection Machine parameters1. Machine load: 2000Kg(max)2. Packaging efficiency: complete a package within 3 minutes (calculated according to the maximum external size, and including the time of paper corner protection)3. Winding conveyor line (self-provided by the demander)5. Rocker speed: 15rpm (max)6. Power: ~3.5KW7. Machine weight: 2000Kg8.

Packaging process:The steel coil is conveyed through the power conveyor (customer's own equipment), and before entering the ring machine, the upper machine transmits the steel coil specifications (including the inner diameter, outer diameter, width, weight, etc.) of the steel coil to the ring machine control system.The steel coil enters the ring machine through the power conveyor (customer-owned), and the ring machine automatically switches the packaging program according to the steel coil specifications provided by the upper machine, and the ring machine automatically packs the steel coil

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

SUPPLY SCOPE OF Wrappers Machine:1.

Standard  specifications Of Full Automatic Unmanned Carton Bagging Machine:Mechanical dimensionsL2400 × W1700 × H1850mmCarton Size (L200～600) × （W200-450）(H=H+W/2<550)mmInbound speed22m/min (0-10 boxes/min)Size of adhesive filmW220 ～ 600mm (M-type folding barrel membrane)Film thickness30~80um (M-type folding barrel membrane)Conversion of carton adhesive filmCarton:（L+W）*2+160mmPower Supply220V/380V  50HZTable Height <600mmMechanical length including leveling of bag in boxStandard machine length 1800mmNon standard machine specification：Mec

Operation Guiding of Banding Machine(automatic strapping machine):Put the tape into the set position, press the "feed" button to twist the tape will automatically be delivered to the position and enter the working state.Manual mode Place the product to be bundled in the middle of the strapping area, press the "start" button, strap the product to be bundled, glued and cut, and then send it into place to enter the next strapping job.The bundled product is removed and the machine can proceed to the next bundle.Auto Mode Press the "Auto" key, and the light will turn o

DESCRIPTION Of Horizontal strapping machine  :Pallet dimensions :1290 x 1290x150 mm.Load dimensions: 1200 x 1200 mm.Pallet height: Min.1049mm including pallet heightPallet weigh: 1200kg/palletConveyor height: 200mm. (chains conveyor)Strapping pattern: horizonltalProduct strapped:  Metal bucketProduction capacity :120Pallet/hour-2pcs stap in one pallet materials SOLUTION For Horizontal strapping machine :It is a strapping laptop at one head appositively deliberate to a entire automation of the packaging lines.

The strapping head is on top with an automatic extension of the corner guards with a strapping machine for piercing arrows.The strapping machine consists of the following parts:1. Strong and durable structural frame2. The strapping machine head can provide reliable tensile force and stable interface strength, modular and quick replacement3. Through the structure of braking motor + rack and pinion, drive the pressure plate frame to move up and down4. The machine head is firmly placed in the head seat, and follows the lifting frame to do vertical movement5.

Main Performance of Trayless Winding Packaging Machine Wrapping Packing Machines:Control system:1. Human-machine interface control, the number and number of winding layers can be set;  2. Program-controlled unit all-in-one machine;           3. Photoelectric switch, automatically sense the height of the goods;4. Reinforced winding function, which can carry out special protection for a certain part;5. Top-over time setting function.Advantages of man-machine interface:1. Humanized intelligent parameter setting;2.

Manufacturing method of Good Quality Strapping Machine Using PP Packing Tape:1. This product is made of new polypropylene material.2. Production of exceptional superior gear and Japanese embossing technology.3.

Properties of Full Automatic Unmanned Bag Folding Machine:This machine should be used with the automatic bagging machine:Table height: 600mmApplicable power supply: 220v 4.5KWSupply of air pressure source: 6KG/cm2Main Parameters of Full Automatic Unmanned Bag Folding Machine：Machine Size2700×2190×2100mmBox SizeL690*W520*H248mm  L640*W450*H300mmSource power220V  50/60HZAir pressure source5Kg/cm2 Main configurations of Full Automatic Unmanned Bag Folding Machine：ConfigurationsInstructionBrand/OriginControl systemThe latest special PLC controller for stepping mo

Main Technical Data Of Automatic Online Turntable Wrapper Machine :1. Pallet SpecificationSize: L x W x H : 1300 x 1300 x 2000 (mm)Pallet Weight: 1000 2. Conveying machine size：height 550mm*width 1500mm(customer oriented)3. Packing capacity：40 load/h4. Requirement for packing：from one third of 15cm pallet to the overtop of the load but not exceed 15cm。

Specification Of High Strength Machine Use Plastic Winding Film:Specification/ModelWidthThicknessNet weightPaper Core Inner DiameterSFM-1350500mm0.013mm15.00kg76mmSFM-1750500mm0.017mm15.00kg76mmSFM-2050500mm0.020mm15.00kg76mmSFM-2250500mm0.022mm15.00kg76mmSFM-2550500mm0.025mm15.00kg76mmSFM-2850500mm0.028mm15.00kg76mmSFM-3050500mm0.030mm15.00kg76mmMaterialLLDPETypeStretch FilmUsagePackaging FilmFeatureMoisture ProofHardnessSoftProcessing TypeBlow MoldingTransparencyTransparentPlace of OriginChinaBrand NameZINOLINEColorTransaprentFactory Equipment Pictures & Stock Pictures:General Dimen

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

The influence of "Made in China" is gradually expanding, and the industrial manufacturing and logistics chain with Chinese mainland as the source has long formed a trend of radiating the world.

Strapping Machine technical requirements and component formulationRemarks:Packing frame sizePassable height: up to 1400 mmWidth that can be passed: up to 2100 mmDrive method: Driven by a stepless variable speed motorApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgStrapping Machine requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, the strapping strapping slope is ≤ 30mm, and the strapping