Hydraulic Press-manufacture,factory,supplier from China

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

Overall technical parameters of Pallet Push-pull Pproduct Line1. Hydraulic pusher:Pallet retention ejector, without side shift, without forks, without pallet retention function, push-out structure is scissor structure2. The load capacity is 1500KG, the loss distance is about 280mm, and the horizontal center of gravity is about 135mm (subject to the actual design)3.

Operation Guiding of Banding Machine(automatic strapping machine):Put the tape into the set position, press the "feed" button to twist the tape will automatically be delivered to the position and enter the working state.Manual mode Place the product to be bundled in the middle of the strapping area, press the "start" button, strap the product to be bundled, glued and cut, and then send it into place to enter the next strapping job.The bundled product is removed and the machine can proceed to the next bundle.Auto Mode Press the "Auto" key, and the light will turn o

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

Automatic product carton positioning. Automatically lift the carton outward and inner bag after packing, and automatically press the carton into the carton by folding it in half in both directions. Realize automatic output for easy box sealing. Realize unmanned assembly line equipment, improve work efficiency, reduce labor, and improve customer production technology and automation. This machine adopts P.L.C+ display control, which greatly facilitates operation, management, reduces production personnel and labor intensity, and is an indispensable equipment for automated large-scale production.

Classification of Automatic Customized Sorting And Conveyor System:Chain sorter: flip disc / flip plate / wing disc / three-dimensional flip disc / table type with belt.Steel belt sorter: It is equipped with several lateral push-out devices on the steel belt conveyor.Tape sorter: transverse push-out type/oblique tape type/oblique roller type/rotary table type/bottom turning typeRoller sorter: transverse tape type/transverse push-out typeSlide transverse push-out type: plate type/roller table typeHanging sorter: with the hanging conveyor as the main body, with the corresponding item identi

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque

Here's how AMRs fluctuate and why they can be a higher desire in sure situations:Autonomy: The most significant difference is autonomy.AMRs don't rely on human operators to information them.They can navigate thru the coffee roasting plant independently,avoiding obstacles and following predefined routes.This eliminates the want for a dedicated operator.More informations or requirements, please contact with us at any time.AdyWhatsApp:+86-15634865861

Product introduction: Airport Using Luggage Wrapping Machines /Baggage wrapping machine is designed to pack luggage, single cargo, small cargo, etc. in airports, stations, terminals, logistics points and other places. It can wrap the object in all directions to prevent the phenomenon of damage to baggage cargo, moisture-proof, dirt-proof, and being exchanged, so as to play a protective role in the transportation process.

Luggage Wrapper is designed to wrap luggage and related items for security purpose in airport. Film provides extra support while the luggage is being transport to protect from being damaged. The operator places the luggage on the platform and adjusts vertical rods to secure bag according the luggage's size.Specification of Luggage Packing MachineNo.ItemBrandBrand Original(1)InverterDema/ Omron (CE)China/Japan(2)PLC & screenSinoblue display(CE)China(3)Button SchneiderFrance(5)MotorsChinese brand(CE)China(6)BreakerSchneiderFranceTechnical parameter of Luggage Pac

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Control System of Pre-stretched Drip Tape Cylinder Type WrapperProgram control unit integrated machine;counts of wrapping can be set ,Separate top,bottom and up-down wrap count selectors;Reinforcement of winding function, can give special protection to certain;Film carriage of Pre-stretched Drip Tape Cylinder Type WrapperPowered pre-strech system up to 250% to min film consumption Carriage lifting motor：Motor power ：    0.37kwMain configurations of Pre-stretched Drip Tape Cylinder Type WrapperMotor: Gale 85SZDPLC Programming

Technology Parameter of T1650FZ Full Auto Pallet Wrapper Machine:Turntable sizeD=1800mm, H=78mmWrapping size(500-1200)×（500-1200）mm（L×W）Packaging height2400mmTurntable loading2000kgsMachine weight800kgsMachine power1.5kwTurntable speed0-12RPMPower supply voltageSingle-phase 220VPacking materialLLDPE stretch filmControl system of Wrapper Machine:HMI handy to function separate top, backside & up-down wrap rely selectorsPhoto-eye pallet peak sensorReinforce wrap enable extra wrap on equal pointFilm anxiety adjustment on the HMI panel3-12 rpm variable turntable pace by means of

1. Machine and wrapping size of Pre-stretch Pallet Wrapper MachineMax load size(mm) 1200(L)X 1200(W)x2400mmTurntable diameter: 1650mmMast height: 2800mmTurntable height: 78mmTurntable speed:3-12rpmMachine weight: 650 kgPacking size: 2920*1750*930mmMachine weight: 750kgElectrics: 380V 50HZ 3P/220V 50Hz 1P2. Controls of Pre-stretch Pallet Wrapper MachineHMI Digital displayPhoto-eye pallet peak sensorReinforce wrap enable extra wrap on identical location3-12RPM variable turntable pace via inverterCycle pause capability3.

1. Main technical parameters of Aerial work platform/Auto scissors lift:No.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor (V/kw)24/4.521Ma

Main Technical Data Of Automatic Online Turntable Wrapper Machine :1. Pallet SpecificationSize: L x W x H : 1300 x 1300 x 2000 (mm)Pallet Weight: 1000 2. Conveying machine size：height 550mm*width 1500mm(customer oriented)3. Packing capacity：40 load/h4. Requirement for packing：from one third of 15cm pallet to the overtop of the load but not exceed 15cm。

Main Parameters Of Airport Using Bag Wrapper Machines1. Machine introductionLuggage wrapper is designed to wrap baggage and relate gadgets for protection reason in airport.Film presents more guide whilst the baggage is being transport to guard from being damaged.The operator locations the baggage on the platform and adjusts vertical rods to impervious bag in accordance the luggage's size.2. Technical parameterMax.

  Main electrical parts and spare parts of Full Automatic Rotary Arm Stretch WrapperComponent nameBrandPLCSiemensTouch screenSiemensinverterSchneiderPhotoelectric switchPanasonicProximity switchOMRONCircuit breakerSchneiderMini circuit breakerSchneiderContactorSchneiderSolenoid valveStandard configuration: YADEKECylinder Standard configuration: YADEKERocker driving reduction motorChina famous brandMaster device SchneiderBolts and other fasteners Grade 8.8DC24V-3A power supply shall be provided separately, and Mingwei shall be selected as the DC power supply;2、Main tech

Pallet Wrapping Machine Feature: 1. Fully enclosed electrical cabinet to avoid dust entry and prolong the service life of components;2. The protection grade is IP54, meeting CE standards;3. With the function of starting at the origin and starting at the same time, it can more flexibly adapt to the customer's packaging needs;4. The combination of the new film carriage’s design and the unique adhesive coating technology, which makes the stretching effect of the wound membrane more uniform;5. The unique design of balance adjustment wheel,which reduces the ro

OPERATION OF Hot Saels For Full Automatic Turntable Wrapping MachineThe conveying roller will transport the pallet of drink products to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically ，after it ,the pallets will be transported by conveying rollers.The procedure of next will be alike.Main electrical parts and spare parts of Full Automatic Turntable Wrapping MachineComponent nameBrandPLCOMRON(Standard configuration)Touch screenOMRON(Standard configuration)inverterMCGSPhotoelectric switchOMRONProximity switchOMR

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

1.2、Packaging materials:1. LLDPE stretch film;2.