Hydraulic pusher-manufacture,factory,supplier from China

Overall Technical Parameters:1. Hydraulic pusher:Pallet retention ejector, without side shift, without fork, without pallet retention function, the ejection structure is scissor structure2. Load capacity 1500KG, load loss distance of about 280mm, horizontal center of gravity of about 135mm (subject to actual design)3.

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

Overall technical parameters of Pallet Push-pull Pproduct Line1. Hydraulic pusher:Pallet retention ejector, without side shift, without forks, without pallet retention function, push-out structure is scissor structure2. The load capacity is 1500KG, the loss distance is about 280mm, and the horizontal center of gravity is about 135mm (subject to the actual design)3.

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th

Pallet Wrapping Machine Feature: 1. Fully enclosed electrical cabinet to avoid dust entry and prolong the service life of components;2. The protection grade is IP54, meeting CE standards;3. With the function of starting at the origin and starting at the same time, it can more flexibly adapt to the customer's packaging needs;4. The combination of the new film carriage’s design and the unique adhesive coating technology, which makes the stretching effect of the wound membrane more uniform;5. The unique design of balance adjustment wheel,which reduces the ro

Vertical strapping with 2 x 0 straps of pallets Load dimensions including pallet ( L x W x H):1200~2280 mm L x 1200-2000 mm W x  650~2200 mm H (must be checked and confirmed).Main components of vertical strapping machine  1. Basic machine frame with two columns and cross beam, vertical carriage guides and chains2. Rack module, movable between two columns with carriage guide system3. Carriage drive with geared brake motor4. Strap track (chute) frame made of grooved aluminium profiles and fixed to machine frame, spring loaded short flaps to allow strap feed at

The strapping head is on top with an automatic extension of the corner guards with a strapping machine for piercing arrows.The strapping machine consists of the following parts:1. Strong and durable structural frame2. The strapping machine head can provide reliable tensile force and stable interface strength, modular and quick replacement3. Through the structure of braking motor + rack and pinion, drive the pressure plate frame to move up and down4. The machine head is firmly placed in the head seat, and follows the lifting frame to do vertical movement5.

Material Of PP packing strap for automatic strapping machine :Polypropylene wire drawing resin has many advantages, such as good plasticity, strong breaking tension, bending resistance, light specific gravity, high strength, good toughness, soft texture, non-absorbent, recyclable, smooth end surface, small wear and tear, many varieties, easy to use and so on. It has been widely used in various fields.PP packing strap for automatic strapping machine basic description:1. Polypropylene (PP) is the main raw material.

PET Plastic Strap/Belt/Tape , to higher make certain the protection of your goods, professional, environmentally friendly, handy and environment friendly packaging offerings will be provided.Specification of Hot Sales PET Strap For Strapping Machine:itemvalueMaterialPPApplicationMachine PackingPlace of OriginChinaShandongBrand NamezhonglianModel Numberpp-strapColorsGreen Color etcHot Sales PET Plastic Strap for automatic strapping machine - Common StandardsNOTypeWide mmThickness mmFracture strength N（Max）Paper tube specification  mmCoil lengthm1PET 090054*35009±0.30.54+0.031900406×1503500

Strapping Machine technical requirements and component formulationRemarks:Packing frame sizePassable height: up to 1400 mmWidth that can be passed: up to 2100 mmDrive method: Driven by a stepless variable speed motorApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgStrapping Machine requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, the strapping strapping slope is ≤ 30mm, and the strapping

SUPPLY SCOPE:Strapping packing unit (incl. with reeling car)The strapping machine adopts TITAN (VK10K120-16 electric ironing type) strapping machine head imported from Germany. Strapping straps are adopted 12.5-15.5mm x 0.6-0.8mm strapping strap for PET machine. The strapping machine works with the foot bar unit to fix the wooden foot bar bar with the top plate.

Product introduction: Airport Using Luggage Wrapping Machines /Baggage wrapping machine is designed to pack luggage, single cargo, small cargo, etc. in airports, stations, terminals, logistics points and other places. It can wrap the object in all directions to prevent the phenomenon of damage to baggage cargo, moisture-proof, dirt-proof, and being exchanged, so as to play a protective role in the transportation process.

Main Parameters Of Airport Using Bag Wrapper Machines1. Machine introductionLuggage wrapper is designed to wrap baggage and relate gadgets for protection reason in airport.Film presents more guide whilst the baggage is being transport to guard from being damaged.The operator locations the baggage on the platform and adjusts vertical rods to impervious bag in accordance the luggage's size.2. Technical parameterMax.

Semi-Auto Pallet Wrapping Machine Hot Sales!220V AC motor film frame, equipping frequency conversion to adjust tension,changed that adjusting speed by 24V DC motor with power box in same industry of China, and changed he instability of tension.  Technical Specification of Semi-Auto Pallet Wrapping MachineItemSpecificationTurntable sizeD=1650mm, H=78mmWrapping size500-1200mm (L) *500-1200mm (W)Packaging heightMax.2400mm (1800/2800mm available)Turntable loadingMax.2000kgsMachine weight800kgsMachine power1.5kwTurntable speed0-14RPM (adjustable, soft start & stop)Power

TECHNICAL PARAMETERSPallet wrapping machine specifications:Wrapping packing efficiency: 25-35 trays/hour.Palletized cargo specifications:Pallet size: (1220×1020×125) mm (Sichuan type);Cargo palletizing specifications: (1220*1020*1100~1500) mm (including pallet), wide edge conveyed in front.Automatic Extended Paper Corner Protection Pallet Online Wrapping Machine Parameters：Equipment size: (Equipment size is subject to final drawings)Machine load: 2000Kg(max)Rotary table rotation diameter: 2000mmConveying speed: 8~12m/min (frequency conversion speed regulation)Conveyor surface elevation: 7

SUPPLY SCOPE OF Wrappers Machine:1.

  Main electrical parts and spare parts of Full Automatic Rotary Arm Stretch WrapperComponent nameBrandPLCSiemensTouch screenSiemensinverterSchneiderPhotoelectric switchPanasonicProximity switchOMRONCircuit breakerSchneiderMini circuit breakerSchneiderContactorSchneiderSolenoid valveStandard configuration: YADEKECylinder Standard configuration: YADEKERocker driving reduction motorChina famous brandMaster device SchneiderBolts and other fasteners Grade 8.8DC24V-3A power supply shall be provided separately, and Mingwei shall be selected as the DC power supply;2、Main tech

1. Machine and wrapping size of Pre-stretch Pallet Wrapper MachineMax load size(mm) 1200(L)X 1200(W)x2400mmTurntable diameter: 1650mmMast height: 2800mmTurntable height: 78mmTurntable speed:3-12rpmMachine weight: 650 kgPacking size: 2920*1750*930mmMachine weight: 750kgElectrics: 380V 50HZ 3P/220V 50Hz 1P2. Controls of Pre-stretch Pallet Wrapper MachineHMI Digital displayPhoto-eye pallet peak sensorReinforce wrap enable extra wrap on identical location3-12RPM variable turntable pace via inverterCycle pause capability3.

1. Outline of equipment Constructions of equipment are as follows.No.EquipmentQ’tyDescription1Robot1Without robot base2Standard Hand13Control box14Manual teaching box1With 10m cable5Emergency stop21 on control box and 1 on teaching box6Cable between control box and robot110m7Teaching memoryMax 120 blocks,90steps×90layers※Condition”blocks”×”steps”×”layers”≦45,0008External interlock signalsPlease refer to Interlock List in electrical drawings for the kinds. 2. General specificationsLayout type: Please refer to Layout Drawing attached.

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Advantages of automated warehouse1.