Lifting Machine-manufacture,factory,supplier from China

1. Main technical parameters of Automatic Lifting PlatformNo.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor

Features of automatic scissors lifting platform:1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded by itself without tools.2. The use of maintenance-free lifting arm sleeve, powder coating and nickel-plated bolt pin increases the wear resistance of the shaft pin and prolongs the service life of the lifting platform.3. Low noise can enable the operator to operate in a quiet working environment, and the large-angle steering system provides face-to-face maneuverability.4.

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

APPLICATION OF AGV Unman ForkliftIndustrial layout - intelligent logisticsBMW Stacker AGVAGV in photovoltaic industryAGV in tyre industry Technical Parameters of AGV Unman Forklift:Parameter ItemParameter indexModelAGVBasic functionCarrying, liftingDeadweight300KGGuidance modeMagnetic navigationTravel directionForward and backwardDrive mode4WDForward speed10m/min~30m/minAddress reading modeRFID componentsLoad capacityCarrying 200KG (maximum load capacity measured under the optimal road surface)Lifting stroke400mmGradeability≤2°Minimum turning radiusR800mmLinear guidanc

1. Main technical parameters of Aerial work platform/Auto scissors lift:No.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor (V/kw)24/4.521Ma

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

The strapping head is on top with an automatic extension of the corner guards with a strapping machine for piercing arrows.The strapping machine consists of the following parts:1. Strong and durable structural frame2. The strapping machine head can provide reliable tensile force and stable interface strength, modular and quick replacement3. Through the structure of braking motor + rack and pinion, drive the pressure plate frame to move up and down4. The machine head is firmly placed in the head seat, and follows the lifting frame to do vertical movement5.

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque

Control System of Pre-stretched Drip Tape Cylinder Type WrapperProgram control unit integrated machine;counts of wrapping can be set ,Separate top,bottom and up-down wrap count selectors;Reinforcement of winding function, can give special protection to certain;Film carriage of Pre-stretched Drip Tape Cylinder Type WrapperPowered pre-strech system up to 250% to min film consumption Carriage lifting motor：Motor power ：    0.37kwMain configurations of Pre-stretched Drip Tape Cylinder Type WrapperMotor: Gale 85SZDPLC Programming

Processing requirements of 90 Degree Roller Turning Machine:Taper roll carbon steel galvanized, frame rectangular pipe sprayed;Technical note of 90 Degree Roller Turning Machine:1. SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;3.

Packaging process:The steel coil is conveyed through the power conveyor (customer's own equipment), and before entering the ring machine, the upper machine transmits the steel coil specifications (including the inner diameter, outer diameter, width, weight, etc.) of the steel coil to the ring machine control system.The steel coil enters the ring machine through the power conveyor (customer-owned), and the ring machine automatically switches the packaging program according to the steel coil specifications provided by the upper machine, and the ring machine automatically packs the steel coil

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

Technical parameters:Paper corner protection specifications: 50×50×5mmEach corner guard bank is placed in an amount of not less than 80 corner protectorsWrapped objects:Packing size: 1200×1100×130mm (pallet) (length * width * height)Paper Corner Protection Machine parameters1. Machine load: 2000Kg(max)2. Packaging efficiency: complete a package within 3 minutes (calculated according to the maximum external size, and including the time of paper corner protection)3. Winding conveyor line (self-provided by the demander)5. Rocker speed: 15rpm (max)6. Power: ~3.5KW7. Machine weight: 2000Kg8.

SUPPLY SCOPE OF Wrappers Machine:1.

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

Operation Guiding of Banding Machine(automatic strapping machine):Put the tape into the set position, press the "feed" button to twist the tape will automatically be delivered to the position and enter the working state.Manual mode Place the product to be bundled in the middle of the strapping area, press the "start" button, strap the product to be bundled, glued and cut, and then send it into place to enter the next strapping job.The bundled product is removed and the machine can proceed to the next bundle.Auto Mode Press the "Auto" key, and the light will turn o

Standard  specifications Of Full Automatic Unmanned Carton Bagging Machine:Mechanical dimensionsL2400 × W1700 × H1850mmCarton Size (L200～600) × （W200-450）(H=H+W/2<550)mmInbound speed22m/min (0-10 boxes/min)Size of adhesive filmW220 ～ 600mm (M-type folding barrel membrane)Film thickness30~80um (M-type folding barrel membrane)Conversion of carton adhesive filmCarton:（L+W）*2+160mmPower Supply220V/380V  50HZTable Height <600mmMechanical length including leveling of bag in boxStandard machine length 1800mmNon standard machine specification：Mec

DESCRIPTION Of Horizontal strapping machine  :Pallet dimensions :1290 x 1290x150 mm.Load dimensions: 1200 x 1200 mm.Pallet height: Min.1049mm including pallet heightPallet weigh: 1200kg/palletConveyor height: 200mm. (chains conveyor)Strapping pattern: horizonltalProduct strapped:  Metal bucketProduction capacity :120Pallet/hour-2pcs stap in one pallet materials SOLUTION For Horizontal strapping machine :It is a strapping laptop at one head appositively deliberate to a entire automation of the packaging lines.

Manufacturing method of Good Quality Strapping Machine Using PP Packing Tape:1. This product is made of new polypropylene material.2. Production of exceptional superior gear and Japanese embossing technology.3.

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Main Performance of Trayless Winding Packaging Machine Wrapping Packing Machines:Control system:1. Human-machine interface control, the number and number of winding layers can be set;  2. Program-controlled unit all-in-one machine;           3. Photoelectric switch, automatically sense the height of the goods;4. Reinforced winding function, which can carry out special protection for a certain part;5. Top-over time setting function.Advantages of man-machine interface:1. Humanized intelligent parameter setting;2.

Main Technical Data Of Automatic Online Turntable Wrapper Machine :1. Pallet SpecificationSize: L x W x H : 1300 x 1300 x 2000 (mm)Pallet Weight: 1000 2. Conveying machine size：height 550mm*width 1500mm(customer oriented)3. Packing capacity：40 load/h4. Requirement for packing：from one third of 15cm pallet to the overtop of the load but not exceed 15cm。