Lifting Platform-manufacture,factory,supplier from China

1. Main technical parameters of Automatic Lifting PlatformNo.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor

Features of automatic scissors lifting platform:1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded by itself without tools.2. The use of maintenance-free lifting arm sleeve, powder coating and nickel-plated bolt pin increases the wear resistance of the shaft pin and prolongs the service life of the lifting platform.3. Low noise can enable the operator to operate in a quiet working environment, and the large-angle steering system provides face-to-face maneuverability.4.

1. Main technical parameters of Aerial work platform/Auto scissors lift:No.ItemPerformance Parameters1Working height （mm）137502The max height of the platform （mm）117503Minimum height platform（ mm）25704Extend horizontally（ mm）9106Platform carrying capacity （kg）3209Grade ability25%10Minimum turning radius （mm）230011Operating speedDown (s)5512Up (s）7013Closed car length(mm)247014Closed car width （m）1.1815Closed car height( m)2.5716Platform size  (m)2.30*1.17*1.117Ground clearance (mm)10018Driving wheel size (in)15X5X1119Weight (kg)291020Lifting motor (V/kw)24/4.521Ma

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

APPLICATION OF AGV Unman ForkliftIndustrial layout - intelligent logisticsBMW Stacker AGVAGV in photovoltaic industryAGV in tyre industry Technical Parameters of AGV Unman Forklift:Parameter ItemParameter indexModelAGVBasic functionCarrying, liftingDeadweight300KGGuidance modeMagnetic navigationTravel directionForward and backwardDrive mode4WDForward speed10m/min~30m/minAddress reading modeRFID componentsLoad capacityCarrying 200KG (maximum load capacity measured under the optimal road surface)Lifting stroke400mmGradeability≤2°Minimum turning radiusR800mmLinear guidanc

Main Parameters Of Airport Using Bag Wrapper Machines1. Machine introductionLuggage wrapper is designed to wrap baggage and relate gadgets for protection reason in airport.Film presents more guide whilst the baggage is being transport to guard from being damaged.The operator locations the baggage on the platform and adjusts vertical rods to impervious bag in accordance the luggage's size.2. Technical parameterMax.

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

Luggage Wrapper is designed to wrap luggage and related items for security purpose in airport. Film provides extra support while the luggage is being transport to protect from being damaged. The operator places the luggage on the platform and adjusts vertical rods to secure bag according the luggage's size.Specification of Luggage Packing MachineNo.ItemBrandBrand Original(1)InverterDema/ Omron (CE)China/Japan(2)PLC & screenSinoblue display(CE)China(3)Button SchneiderFrance(5)MotorsChinese brand(CE)China(6)BreakerSchneiderFranceTechnical parameter of Luggage Pac

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

Control System of Pre-stretched Drip Tape Cylinder Type WrapperProgram control unit integrated machine;counts of wrapping can be set ,Separate top,bottom and up-down wrap count selectors;Reinforcement of winding function, can give special protection to certain;Film carriage of Pre-stretched Drip Tape Cylinder Type WrapperPowered pre-strech system up to 250% to min film consumption Carriage lifting motor：Motor power ：    0.37kwMain configurations of Pre-stretched Drip Tape Cylinder Type WrapperMotor: Gale 85SZDPLC Programming

The strapping head is on top with an automatic extension of the corner guards with a strapping machine for piercing arrows.The strapping machine consists of the following parts:1. Strong and durable structural frame2. The strapping machine head can provide reliable tensile force and stable interface strength, modular and quick replacement3. Through the structure of braking motor + rack and pinion, drive the pressure plate frame to move up and down4. The machine head is firmly placed in the head seat, and follows the lifting frame to do vertical movement5.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

Scheme of Intelligent Sorting And Conveying System For Manmade Board Industry:The inspection plate specifications are wide (1080-1830), long (2100-2745), working level: veneer transport 2350mm;The pallet transport height is 800mm, the scheme is at the exit of the butt sand saw line The pallet is reversed through the 360 rotary roller conveyor to enter our roller chain conversion conveyor into the lifting table in turn to raise the working height to 800, so that it enters the double-line double-entry plate destacking position through the roller chain conversion conveyor in turn for plate inspec

PE film has moisture resistance, small moisture permeability, is a blown film, thick texture, not easy to stretch and deform.Product Specification For PE capping films(More specification,please contact with us at any time):Width (mm): 300-2000Thickness (mm): 0.05-0.40Production process of PE film:Film blowing machine is a mechanical equipment that heats and melts plastic particles and then blows them into a film.

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

Brief Introduction Of Jacking Transplanting SorterJacking Transplanting Sorter Is Widely Used In Automatic Storage And Logistics System. Conduct Shunting And Merging Of Logistics Boxes Or Packing Boxes. Allocation Operation Is A Non Common Operation In A Physical System. This Equipment Can Be Used In Shunting And Distribution Operations. Diversion Refers To That The Conveying Line Is Divided Into Two Lines Along The Conveying Direction Of The Roadway. Generally, The Goods Are Transported In Categories.

Classification requirements:1.

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

Technical specifications of Paper Roll Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

Semi-Auto Pallet Wrapping Machine Hot Sales!220V AC motor film frame, equipping frequency conversion to adjust tension,changed that adjusting speed by 24V DC motor with power box in same industry of China, and changed he instability of tension.  Technical Specification of Semi-Auto Pallet Wrapping MachineItemSpecificationTurntable sizeD=1650mm, H=78mmWrapping size500-1200mm (L) *500-1200mm (W)Packaging heightMax.2400mm (1800/2800mm available)Turntable loadingMax.2000kgsMachine weight800kgsMachine power1.5kwTurntable speed0-14RPM (adjustable, soft start & stop)Power