Manmade Board Automatic Conveying Packaging System-manufacture,factory,supplier from China

Intelligent Packing System  For Manmade Board Scheme Feature:1. The transfer conveyor requires stable conveying.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

Scheme of Intelligent Sorting And Conveying System For Manmade Board Industry:The inspection plate specifications are wide (1080-1830), long (2100-2745), working level: veneer transport 2350mm;The pallet transport height is 800mm, the scheme is at the exit of the butt sand saw line The pallet is reversed through the 360 rotary roller conveyor to enter our roller chain conversion conveyor into the lifting table in turn to raise the working height to 800, so that it enters the double-line double-entry plate destacking position through the roller chain conversion conveyor in turn for plate inspec

Classification requirements:1.

Brief Introduction Of Jacking Transplanting SorterJacking Transplanting Sorter Is Widely Used In Automatic Storage And Logistics System. Conduct Shunting And Merging Of Logistics Boxes Or Packing Boxes. Allocation Operation Is A Non Common Operation In A Physical System. This Equipment Can Be Used In Shunting And Distribution Operations. Diversion Refers To That The Conveying Line Is Divided Into Two Lines Along The Conveying Direction Of The Roadway. Generally, The Goods Are Transported In Categories.

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Technical specifications of Paper Roll Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

Workflow Automatic Conveying And Stacking Packaging System For Gypsum Lines Or Long Wire Sheets：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packag

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

 Specifications Profile Plate Conveyor System Automatic Online Packaging Line :MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations for Profile Plate Conveyor System Automatic Online Packaging Line:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 p

1.2、Packaging materials:1. LLDPE stretch film;2.

Peculiarity of Automatic Roof Adding Rectangular Coordinate Manipulator:1. Multi-degree of freedom movement, the spatial angle between each motion freedom is a right angle.2. Automatic control, reprogrammable and all movements run according to the program.3. It is generally composed of control system, drive system, mechanical system, operating tools, etc.4. Flexible and multi-functional, due to the different functions of the operating tools.5. High reliability, high speed and high precision.6.

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

Technical parameters of Automatic Door And Window Wide Horizontal Wrapping Winding Packaging Machine1. Product specifications and packaging requirementsPackaging: doors and windowsWidth: 1000mm-2400mmThickness: ≤ 120mm, ≥80mmLength: ≥1200mm, ≤2400mm2. Packaging materialsUse a fixed size wrapping filmLLDPE stretch filmThickness: 20-30μmFilm width: 500mm (fixed size)Inner diameter of paper cylinder: 76.2mmMaximum outer diameter of film roll: 240mmSupply Scope:1.

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

OPERATION OF Hot Saels For Full Automatic Turntable Wrapping MachineThe conveying roller will transport the pallet of drink products to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically ，after it ,the pallets will be transported by conveying rollers.The procedure of next will be alike.Main electrical parts and spare parts of Full Automatic Turntable Wrapping MachineComponent nameBrandPLCOMRON(Standard configuration)Touch screenOMRON(Standard configuration)inverterMCGSPhotoelectric switchOMRONProximity switchOMR

Features of automatic scissors lifting platform:1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded by itself without tools.2. The use of maintenance-free lifting arm sleeve, powder coating and nickel-plated bolt pin increases the wear resistance of the shaft pin and prolongs the service life of the lifting platform.3. Low noise can enable the operator to operate in a quiet working environment, and the large-angle steering system provides face-to-face maneuverability.4.

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

1. Packaging overview1.1 This equipment is a special equipment for automatically winding stretch film onto the carton.

Main Technical Data Of Automatic Online Turntable Wrapper Machine :1. Pallet SpecificationSize: L x W x H : 1300 x 1300 x 2000 (mm)Pallet Weight: 1000 2. Conveying machine size：height 550mm*width 1500mm(customer oriented)3. Packing capacity：40 load/h4. Requirement for packing：from one third of 15cm pallet to the overtop of the load but not exceed 15cm。

Introduction of spiral belt conveyor:1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of spiral belt conveyor machines:1. The central body is welded with carbon metal (5mm thickness). The exterior conveyor chain body is mounted from the pinnacle via the core body to the bottom.2. The outer conveying body is made of 304 stainless metal with a thickness of 2.5mm.3.

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

Goods Specifications:MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 pieces200mmLength914mm~1500mm2 pieces360mmLength1500mm~2400mm2 pieces450mmLength 2400mm~3600mm3 pieces443mm or more630mm