Manmade Board-manufacture,factory,supplier from China

Intelligent Packing System  For Manmade Board Scheme Feature:1. The transfer conveyor requires stable conveying.

Process Of Manmade Board Intelligent Packaging System:After the pallets enter the packing line in turn, the pallets are successively completed through chain transportation, including top lamination, automatic erection corner protection, automatic wrapping, automatic topping protection plate, and cushioning longitudinal and transverse strapping process, after the packaging is completed, the forklift passes the shipment, and the lifting chain conveyor transfers the pallet to the storage positionBasic parameters of Manmade Board Intelligent Packaging System:1.

Scheme of Intelligent Sorting And Conveying System For Manmade Board Industry:The inspection plate specifications are wide (1080-1830), long (2100-2745), working level: veneer transport 2350mm;The pallet transport height is 800mm, the scheme is at the exit of the butt sand saw line The pallet is reversed through the 360 rotary roller conveyor to enter our roller chain conversion conveyor into the lifting table in turn to raise the working height to 800, so that it enters the double-line double-entry plate destacking position through the roller chain conversion conveyor in turn for plate inspec

Classification requirements:1.

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Introduction to Belt Turning Conveyor:The turning belt conveyor can transport a extensive range of materials, which can transport a range of bulk materials, as properly as transport a range of small packing containers of items such as cartons and packaging bags. The shape of the turning belt conveyor has a forty five diploma turning belt conveyor, a ninety diploma turning belt conveyor, and a one hundred eighty diploma turning belt conveyor, which can meet the technical necessities of a number turning conveyance. The belt conveyor is geared up with PVC, PU and different materials.

Peculiarity of Automatic Roof Adding Rectangular Coordinate Manipulator:1. Multi-degree of freedom movement, the spatial angle between each motion freedom is a right angle.2. Automatic control, reprogrammable and all movements run according to the program.3. It is generally composed of control system, drive system, mechanical system, operating tools, etc.4. Flexible and multi-functional, due to the different functions of the operating tools.5. High reliability, high speed and high precision.6.

Packaging & Delivery of 12um Plastic Stretch Film:Specification of 12um 15kg/Roll Stretch PE Film：MaterialLLDPEWeight15KGWidth500mmThickness12micronColortransparentHardnessSoftFeatureMoisture ProofModel number12um*500mm*15KGPackingAccording to different specifications, We can provide carton size as your request.DeliveryDelivery within 30 days after receipt of depositPayment30% T/T payment in advance, 70% before shipment.Delivery Pictures of 15kg Machine Use PE Plastic Wrapping Film:We can customize according to your requirement. We can help you to save lots of cost and recommend

Product introduction: Airport Using Luggage Wrapping Machines /Baggage wrapping machine is designed to pack luggage, single cargo, small cargo, etc. in airports, stations, terminals, logistics points and other places. It can wrap the object in all directions to prevent the phenomenon of damage to baggage cargo, moisture-proof, dirt-proof, and being exchanged, so as to play a protective role in the transportation process.

OPERATION OF Hot Saels For Full Automatic Turntable Wrapping MachineThe conveying roller will transport the pallet of drink products to the location of rotary wrapping machine, automatically start wrapping till to finish packing .and then film is cut automatically ，after it ,the pallets will be transported by conveying rollers.The procedure of next will be alike.Main electrical parts and spare parts of Full Automatic Turntable Wrapping MachineComponent nameBrandPLCOMRON(Standard configuration)Touch screenOMRON(Standard configuration)inverterMCGSPhotoelectric switchOMRONProximity switchOMR

Technical parameters of Automatic Door And Window Wide Horizontal Wrapping Winding Packaging Machine1. Product specifications and packaging requirementsPackaging: doors and windowsWidth: 1000mm-2400mmThickness: ≤ 120mm, ≥80mmLength: ≥1200mm, ≤2400mm2. Packaging materialsUse a fixed size wrapping filmLLDPE stretch filmThickness: 20-30μmFilm width: 500mm (fixed size)Inner diameter of paper cylinder: 76.2mmMaximum outer diameter of film roll: 240mmSupply Scope:1.

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque

1. Outline of equipment Constructions of equipment are as follows.No.EquipmentQ’tyDescription1Robot1Without robot base2Standard Hand13Control box14Manual teaching box1With 10m cable5Emergency stop21 on control box and 1 on teaching box6Cable between control box and robot110m7Teaching memoryMax 120 blocks,90steps×90layers※Condition”blocks”×”steps”×”layers”≦45,0008External interlock signalsPlease refer to Interlock List in electrical drawings for the kinds. 2. General specificationsLayout type: Please refer to Layout Drawing attached.

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

Product introduction of AGV Unmanned Forklift:AGV depends on its personal battery to furnish power, using stability, no noise, no air pollution at some stage in driving, and can be used in many locations that require a smooth working environment. Touch display human-computer interplay is adopted to facilitate the placing of parameters and stations.

Technical specifications of Paper Roll Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.

Brief Introduction Of Jacking Transplanting SorterJacking Transplanting Sorter Is Widely Used In Automatic Storage And Logistics System. Conduct Shunting And Merging Of Logistics Boxes Or Packing Boxes. Allocation Operation Is A Non Common Operation In A Physical System. This Equipment Can Be Used In Shunting And Distribution Operations. Diversion Refers To That The Conveying Line Is Divided Into Two Lines Along The Conveying Direction Of The Roadway. Generally, The Goods Are Transported In Categories.

Workflow Automatic Conveying And Stacking Packaging System For Gypsum Lines Or Long Wire Sheets：The product is sent to the automatic arrangement stacking mechanism through the conveyor line, the mechanism will automatically stack the products in an orderly manner, temporarily stored on the product temporary storage line after stacking, the cardboard in the cardboard stacking storage machine will be sent to the pre-packaging host by the cardboard conveyor line, each piece of cardboard, the grabbing mechanism will grab a stack of products on the product temporary storage line into the pre-packag

Detailed description of PET plastic steel strip:PET plastic steel belt, also known as plastic steel belt (PET packaging belt, polyester binding belt), is made of polyethylene terephthalate (PET) as the main raw material. At present, PET plastic steel strip is the most popular new environmental protection packaging material to replace steel strip, steel wire and PP belt packaging in the world.

Material Of PP packing strap for computerized strapping desktop :Polypropylene wire drawing resin has many advantages, such as true plasticity, sturdy breaking tension, bending resistance, mild precise gravity, excessive strength, desirable toughness, tender texture, non-absorbent, recyclable, clean stop surface, small put on and tear, many varieties, effortless to use and so on. It has been broadly used in a number fields.PP packing strap for automated strapping computing device simple description:1. Polypropylene (PP) is the principal uncooked material.

The new generation of hand-held electric packer H-46 Kronos has attracted the attention of global consumers with highly competitive prices, excellent performance and technical features, and has received constant praise since its launch!   Features of Semi-auto Handle Type Strapping MachineNo air pressure source, easy to move and useFriction welding technology is adopted;German made DC brushless motor;Equipped with intelligent digital operation panel;Use high-efficiency Bosch lithium-ion battery;General PP and PET tape;The maximum packing tension can reach 400 kg;One key packagin

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

 Specifications Profile Plate Conveyor System Automatic Online Packaging Line :MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations for Profile Plate Conveyor System Automatic Online Packaging Line:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 p