Rail-guided Vehicle-manufacture,factory,supplier from China

Roller Conveyor Trolley (Rail-guided Vehicle) requirements:Table height: subject to negotiation between the two partiesApplicable power supply: 380VLoad capacity: 1500kgDevice Description:Rail drive motor power: 1.5kwConveying motor power: 1.1kwRoller machine effective width: 1200mm Trolley roller machine length: 1485mm (speed frequency conversion adjustable, wheel inside with rubber)Effective width of trolley: 1200mm Trolley track length: 13291mm The motor of the roller conveyor and the motor of the trolley need to have brakesProduction Effect Pictures for Roller Conv

Technical parameters of Automatic Door And Window Wide Horizontal Wrapping Winding Packaging Machine1. Product specifications and packaging requirementsPackaging: doors and windowsWidth: 1000mm-2400mmThickness: ≤ 120mm, ≥80mmLength: ≥1200mm, ≤2400mm2. Packaging materialsUse a fixed size wrapping filmLLDPE stretch filmThickness: 20-30μmFilm width: 500mm (fixed size)Inner diameter of paper cylinder: 76.2mmMaximum outer diameter of film roll: 240mmSupply Scope:1.

Introduction of automatic bagging and packaging machineAutomatic bagging packaging machine, also known as shrink packaging machine, is usually a machine that wraps the product with heat shrinkable film and then heats it, so that the film shrinks and wraps the product.

This model of Semi-automatic Horizontal Baler is a enhanced design with stronger structure of machine body.

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

Design parameters based on:Two consecutive shifts per day, each shift work for 12 hoursA total of 3 slitting linesThe monthly output is 1200 tons, the daily output is about 40 tons, the hourly material is about 2 tons, according to the average quality of 100 kg per pack, at least 20 packs of goods per hourThe minimum width of the cloth roll slitting is 100mmThe maximum height of the cantilever machine packaging is 1800mm and the minimum height is 500mmThe number of packaging layers is not less than 8 layers, and the number of system circle layers is adjustablePackaging efficiency requirements:

Material Of PP packing strap for computerized strapping desktop :Polypropylene wire drawing resin has many advantages, such as true plasticity, sturdy breaking tension, bending resistance, mild precise gravity, excessive strength, desirable toughness, tender texture, non-absorbent, recyclable, clean stop surface, small put on and tear, many varieties, effortless to use and so on. It has been broadly used in a number fields.PP packing strap for automated strapping computing device simple description:1. Polypropylene (PP) is the principal uncooked material.

Detailed description of PET plastic steel strip:PET plastic steel belt, also known as plastic steel belt (PET packaging belt, polyester binding belt), is made of polyethylene terephthalate (PET) as the main raw material. At present, PET plastic steel strip is the most popular new environmental protection packaging material to replace steel strip, steel wire and PP belt packaging in the world.

Vertical strapping with 2 x 0 straps of pallets Load dimensions including pallet ( L x W x H):1200~2280 mm L x 1200-2000 mm W x  650~2200 mm H (must be checked and confirmed).Main components of vertical strapping machine  1. Basic machine frame with two columns and cross beam, vertical carriage guides and chains2. Rack module, movable between two columns with carriage guide system3. Carriage drive with geared brake motor4. Strap track (chute) frame made of grooved aluminium profiles and fixed to machine frame, spring loaded short flaps to allow strap feed at

SUPPLY SCOPE:Strapping packing unit (incl. with reeling car)The strapping machine adopts TITAN (VK10K120-16 electric ironing type) strapping machine head imported from Germany. Strapping straps are adopted 12.5-15.5mm x 0.6-0.8mm strapping strap for PET machine. The strapping machine works with the foot bar unit to fix the wooden foot bar bar with the top plate.

Operation process of Ton Packing Press Machine (Hydraulic Press): Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lift the

The new generation of hand-held electric packer H-46 Kronos has attracted the attention of global consumers with highly competitive prices, excellent performance and technical features, and has received constant praise since its launch!   Features of Semi-auto Handle Type Strapping MachineNo air pressure source, easy to move and useFriction welding technology is adopted;German made DC brushless motor;Equipped with intelligent digital operation panel;Use high-efficiency Bosch lithium-ion battery;General PP and PET tape;The maximum packing tension can reach 400 kg;One key packagin

Operation Guiding of Banding Machine(automatic strapping machine):Put the tape into the set position, press the "feed" button to twist the tape will automatically be delivered to the position and enter the working state.Manual mode Place the product to be bundled in the middle of the strapping area, press the "start" button, strap the product to be bundled, glued and cut, and then send it into place to enter the next strapping job.The bundled product is removed and the machine can proceed to the next bundle.Auto Mode Press the "Auto" key, and the light will turn o

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

1. Usually the Stainless Material Roller Conveyor System can be divided into strength and non-power curler traces in accordance to using mode.Power curler conveyor systemStandard energy curler tools can be divided into two types: retractable kind and constant type. Its fundamental shape involves casters, a rack, a roller, an electric powered manage box, and using equipment.Non-power curler conveyor systemSuitable for all bulk materials, small items, or uncommon objects that need to be positioned on pallets or switch boxes.

Classification requirements:1.

FEATURES of Self-propelled Pre-stretch Film Wrapping Machine：1. Automatic walking pre-stretching and winding operation, which can work continuously for 8 hours when fully charged.2. The control system is controlled by a special system to control the inverter to drive the motor, control the action of the mechanical transmission mechanism, and realize stepless speed regulation, the system is stable and reliable, and the equipment is easy to use and maintain3.

Pallet Wrapping Machine Use Strong Packaging Film Specification:Specification/ModelWidthThicknessNet weightPaper Core Inner DiameterSFM-1350500mm0.013mm15.00kg76mmSFM-1750500mm0.017mm15.00kg76mmSFM-2050500mm0.020mm15.00kg76mmSFM-2250500mm0.022mm15.00kg76mmSFM-2550500mm0.025mm15.00kg76mmSFM-2850500mm0.028mm15.00kg76mmSFM-3050500mm0.030mm15.00kg76mmQuality judgment wellknown of stretch films for winding machine:1. Transparency (the higher the transparency, the purer the uncooked substances used);2.

Pallet Wrapping Machine Feature: 1. Fully enclosed electrical cabinet to avoid dust entry and prolong the service life of components;2. The protection grade is IP54, meeting CE standards;3. With the function of starting at the origin and starting at the same time, it can more flexibly adapt to the customer's packaging needs;4. The combination of the new film carriage’s design and the unique adhesive coating technology, which makes the stretching effect of the wound membrane more uniform;5. The unique design of balance adjustment wheel,which reduces the ro

Packaging & Delivery of 12um Plastic Stretch Film:Specification of 12um 15kg/Roll Stretch PE Film：MaterialLLDPEWeight15KGWidth500mmThickness12micronColortransparentHardnessSoftFeatureMoisture ProofModel number12um*500mm*15KGPackingAccording to different specifications, We can provide carton size as your request.DeliveryDelivery within 30 days after receipt of depositPayment30% T/T payment in advance, 70% before shipment.Delivery Pictures of 15kg Machine Use PE Plastic Wrapping Film:We can customize according to your requirement. We can help you to save lots of cost and recommend

PP Packaging Strap/Belt/Tape Details：PP Pacakaging Strap/Tape/Belt Specifications：itemvalueMaterialPPApplicationMachine PackingPlace of OriginChinaZhejiangBrand NameZHONGLIANModel Numberpp-strapColorsGreen Color etcDelivery & Shipping Pictures of PP Packaging Strap:Straping Pictures refrence:More information, please contact with me at any time.AdyWhatsApp:+86 15634865861

Horizontal Full Automatic Strapping Machine for Pallet is a strapping machine at one head appositively planned to a complete automation of the packaging lines. It is made with strong and heavy duty columns and has been appositively studied to allow a complete automation of packaging lines for food industries. It allows in the same time the strapping cycle.  Horizontal Pallet Full Automatic Strapping Machine  Strap P.E.T.Useful dimensions Width:16mm., thickness:0,6 – 0.9mm.Inside coil diameterInner core diameter 406 mm.

Manufacturing method of Good Quality Strapping Machine Using PP Packing Tape:1. This product is made of new polypropylene material.2. Production of exceptional superior gear and Japanese embossing technology.3.