Vertical Lifing Conveyor-manufacture,factory,supplier from China

Technical specifications and requirements:1) Table of technical parameters:Sequence Number, Equipment Name, Performance, Quantity1. Vertical conveyor machine load-bearing: 2T;Increase efficiency: 60 times per hour;Lifting speed: 24m/min;Whole power: 9KW 4 sets2. Loading capacity of inbound and outbound conveyors: 2000Kg;Conveying speed: 140 mm/s;Conveyor length: 2000mm;The height of the conveyor line is 650 mm (+50);Roller diameter: 89mm;Roller spacing: 127 mm;Reduction motor power: 0.75KW 12 sets2) Equipment requirements:Overall requirements:1.

Lifting Equipment for Fully Automatic Unmanned Reciprocating Vertical Lift Conveyor:This full automatic unmanned heavy loading type vertical lifting conveyor is appropriate to lifting cartons, woven bags, plastic barrels and different merchandise up and down vertically.1 The fundamental frame1 Material: 80*80mm aluminum alloy profiles, linked and assembled by means of screwstwo Protective screening: exterior body adopts obvious natural glass2 Conveying system1 The most important chain makes use of carbon metal 16A-1 curler chain whose pitch is 25.4mm with W-2 bending plates bilaterally.two The

Production Instruction of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor：1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor:1. The central frame is welded with carbon steel (5mm thickness). The external conveyor chain frame is installed from the top by the center frame to the bottom.2.

Roller Conveyor Trolley (Rail-guided Vehicle) requirements:Table height: subject to negotiation between the two partiesApplicable power supply: 380VLoad capacity: 1500kgDevice Description:Rail drive motor power: 1.5kwConveying motor power: 1.1kwRoller machine effective width: 1200mm Trolley roller machine length: 1485mm (speed frequency conversion adjustable, wheel inside with rubber)Effective width of trolley: 1200mm Trolley track length: 13291mm The motor of the roller conveyor and the motor of the trolley need to have brakesProduction Effect Pictures for Roller Conv

Chain plate conveyor line is broadly used in automated transportation, distribution of food, canned food, medicine, beverage, cosmetics and washing products,paper products, condiments, dairy and tobacco, etc.

Introduction to Belt Turning Conveyor:The turning belt conveyor can transport a extensive range of materials, which can transport a range of bulk materials, as properly as transport a range of small packing containers of items such as cartons and packaging bags. The shape of the turning belt conveyor has a forty five diploma turning belt conveyor, a ninety diploma turning belt conveyor, and a one hundred eighty diploma turning belt conveyor, which can meet the technical necessities of a number turning conveyance. The belt conveyor is geared up with PVC, PU and different materials.

Vertical strapping with 2 x 0 straps of pallets Load dimensions including pallet ( L x W x H):1200~2280 mm L x 1200-2000 mm W x  650~2200 mm H (must be checked and confirmed).Main components of vertical strapping machine  1. Basic machine frame with two columns and cross beam, vertical carriage guides and chains2. Rack module, movable between two columns with carriage guide system3. Carriage drive with geared brake motor4. Strap track (chute) frame made of grooved aluminium profiles and fixed to machine frame, spring loaded short flaps to allow strap feed at

Technical data of Automatic Vertical Pallet Strapping Machine1. power supply:  3/ n, pe, (neutral wire = loading ability)2. control voltage: 24 v dc3. power score:  max three.zero kw4. overall weight of device: approx. 800 up to 1.000 kg5. ambient temperature restrict:  + five °c up to + 35 °c6. peak of conveyor system:  pinnacle side roller / chain of conveyor machine min. 180mm up to max.

Introduction of spiral belt conveyor:1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of spiral belt conveyor machines:1. The central body is welded with carbon metal (5mm thickness). The exterior conveyor chain body is mounted from the pinnacle via the core body to the bottom.2. The outer conveying body is made of 304 stainless metal with a thickness of 2.5mm.3.

Technical data of Automatic Vertical Pallet Strapping Machine1. Power supply:  3/ N, PE, (Neutral wire = loading capacity)（2. Control voltage: 24 V DC3. Power rating:  max 3.0 kW4. Total weight of machine: approx. 800 up to 1.000 kg5. Ambient temperature limit:  + 5 °C up to + 35 °C6. Height of conveyor system:  Top edge roller / chain of conveyor system min. 180mm up to max. 800mmTechnical DataKA5Strap quality and widthPET9,0 - 18,5 mmPP/Strap coilCore diameter406 mmOuter Diameter600 mmWidth150 mmNo.

1. Usually the Stainless Material Roller Conveyor System can be divided into strength and non-power curler traces in accordance to using mode.Power curler conveyor systemStandard energy curler tools can be divided into two types: retractable kind and constant type. Its fundamental shape involves casters, a rack, a roller, an electric powered manage box, and using equipment.Non-power curler conveyor systemSuitable for all bulk materials, small items, or uncommon objects that need to be positioned on pallets or switch boxes.

The strapping head is on top with an automatic extension of the corner guards with a strapping machine for piercing arrows.The strapping machine consists of the following parts:1. Strong and durable structural frame2. The strapping machine head can provide reliable tensile force and stable interface strength, modular and quick replacement3. Through the structure of braking motor + rack and pinion, drive the pressure plate frame to move up and down4. The machine head is firmly placed in the head seat, and follows the lifting frame to do vertical movement5.

Classification of Automatic Customized Sorting And Conveyor System:Chain sorter: flip disc / flip plate / wing disc / three-dimensional flip disc / table type with belt.Steel belt sorter: It is equipped with several lateral push-out devices on the steel belt conveyor.Tape sorter: transverse push-out type/oblique tape type/oblique roller type/rotary table type/bottom turning typeRoller sorter: transverse tape type/transverse push-out typeSlide transverse push-out type: plate type/roller table typeHanging sorter: with the hanging conveyor as the main body, with the corresponding item identi

Technical parameters of Automatic Ring Horizontal Wrapper Packing Machine1. Product specifications and packaging requirementsProduct Name: Door CoverProduct weight: 100kg(max)Door set length: 800mm-4000mm     Packing width 140-400mmPacking height 90-300mmThe horizontal sleeve and vertical sleeve of the door sleeve are stacked neatly before winding, and since the cross sleeve is shorter than the vertical sleeve, the horizontal sleeve and the head end of the vertical sleeve must be aligned before winding (refer to the customer's site photo).2.

 Specifications Profile Plate Conveyor System Automatic Online Packaging Line :MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H） Main components configurations for Profile Plate Conveyor System Automatic Online Packaging Line:Motor reducer: SEWFrequency converter: Siemens/AB/DanfossServo motor: SiemensPLC: Siemens/ABLow voltage apparatus: SiemensProximity/photoelectric switch: SICKPneumatic components: FESTO/SMCStacking typeA(Wood block quantity)B (Space scope between two wood blocks)C (Space scope between wood block and the sides)Length 609mm~914mm2 p

Product performance advantages:1. Touch screen control, easy to operate;2. Pre-stretched film frame, 220V AC motor with inverter to adjust the tension force, change the speed regulation of the 24V DC motor and power box applied to the film frame in the same industry in China, and change the instability of tension force.Technical Parameters:1. Turntable diameter: 2000mm (this data is for reference, subject to the design of the technical department)2. Wrapping specifications:3.

Manufacturing process requirements:Chain plate is made of stainless steel, and chain is made of side plate.The side plate of the rack is cold plate hemming paint, and the support is 50X50 square pipe welding process.Brand: SEWMotor power: 1.1 kwAdopt the way of variable frequency speed regulationService life of equipment:The service life of the equipment can reach about 10 years if it is maintained twice a year without man-made damage or misoperation.Working conditions:1 working system: three-shift production, 8 hours per shift, no less than 300 working days per year, 24 hours continuous opera

Main Parameters Of Airport Using Bag Wrapper Machines1. Machine introductionLuggage wrapper is designed to wrap baggage and relate gadgets for protection reason in airport.Film presents more guide whilst the baggage is being transport to guard from being damaged.The operator locations the baggage on the platform and adjusts vertical rods to impervious bag in accordance the luggage's size.2. Technical parameterMax.

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Package sizeLine 1 corresponding specifications (excluding pad height):MIN:609mm x 984mm x17mm（L x W x H）MAX:10000mm x 984mm x 35mm（L x W x H）Line 2 corresponding specifications (excluding pad height):MIN:609mm x 915mm x42mm（L x W x H）MAX:12192mm x 915mm x118mm（L x W x H）Stacker DescriptionStacking lifting chain conveyorStacking lifting position chain conveyor is composed of 1 set of 12 meters long four-row chain conveyor, the conveyor adopts heavy-duty square pipe welded frame, effective length 12000mm, effective width 1010mm, height about 600mm, speed 10m/min, SEW gearmotor, freque

Main technology parameters1. Baggage Packaging Machine introductionBuggage Packaging is designed to wrap bags and associated objects for protection motive in airport.Film gives greater guide whilst the bags is being transport to shield from being damaged.The operator locations the bags on the platform and adjusts vertical rods to invulnerable bag in accordance the luggage's size.2. Technical parameter of Baggage Packaging MachineMax.

Luggage Wrapper is designed to wrap luggage and related items for security purpose in airport. Film provides extra support while the luggage is being transport to protect from being damaged. The operator places the luggage on the platform and adjusts vertical rods to secure bag according the luggage's size.Specification of Luggage Packing MachineNo.ItemBrandBrand Original(1)InverterDema/ Omron (CE)China/Japan(2)PLC & screenSinoblue display(CE)China(3)Button SchneiderFrance(5)MotorsChinese brand(CE)China(6)BreakerSchneiderFranceTechnical parameter of Luggage Pac

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Technical specifications of Paper Roll Conveying And Packaging SystemChain pitch:P = 63.5 mmDriving speed:24 m/min the slat conveyor is designed with high driving speed to meet the production requirement and is frequency-controlledSlat width:B = 55 mmSlat length:L = 250 mmThickness:S = 8 mm  Stainless steel 304Features: The conveyor slat is made in V-Shaped, Angle: 170°.